3/28/2021 0 Comments Fanuc Data Server Setup
I called Fanuc for support, but nothing they suggested cleared the error. Any ideas.Anyway, I can access the folder on a pc based ftp server and get programs in and out from the control.
![]() ![]() A.k. from the PC not at the machine control Am I smoking something in thinking I can do it this way. Right now the only way i can load programs is to use FTP software from a remote computer. Fanuc Data Server Setup How To Set ItI would like to be able to load them right from my controller, but Im not sure how to set it up to do this. Any information you would be willing to share would be great. What I want to be able to do is stand at my control and load the programs from there. Is there something I need to configure differently Im sure I am just not understanding something completely. To go from Machine to PC, you need to have the host username and password, location it should look for programs like C:Dataserv. The computer users username (jdoe) and password () needs to be setup on the machine also, otherwise the PC won;t let the machine in. I could walk you through it sometime if you want over the phone. Then setup the fanuc settings for the data server so it can log into your newly created ftp server. If you have mapps., you will need some instructions on how to use the mapps remote server screen. Really, the best way to go is to plug from the machine into a switch or hub that is connected to your network, then you can access the machine from anywhere in the shop as long as you have the passowrd and username. Plugging directly into a router is not necessary unless you have the Dataserver setup in DHCP Mode and there is not a device on the network issuing IP addresses. We use a DNC program to pull the G-code file from our server to a PC. ![]() We have this set up on roughly 20 routers, but on a couple when trying to ping the PC from the controller we get an error. I called Fanuc for support, but nothing they suggested cleared the error.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |